Are you interested in getting off the beaten path? The Inspire offers a style that will surely withstand variable trends with these pure lines of balanced proportions, allowing the brand Osburn to easily compare to European-style products. This more contemporary look is available on steel base, soapstone or even a minimalist base for those who prefer to place the unit directly on a non-combustible podium. Equipped with a 2.3 cubic feet firebox and an outside air intake, this unit will meet the requirements of domestic energy standards, not to mention that a mobile home installation is permitted.
The Inspire largely meets EPA requirements withemissions as low as 1.54 g/hand complies with the most stringent North American requirements. A guarantee of quality, reliability and durability, once again Osburn clearly demonstrates its firm commitment to the environment to the delight of wood heating fans.
GENERAL FEATURES
| Combustion technology |
Non-catalytic |
| Average overall efficiency (EPA cribs/Douglas fir) |
N.A. |
| Average overall efficiency-EPA cribs/Douglas fir |
N.A. |
| High-efficiency certified appliance |
Yes, EPA 2020 approved |
| Maximum log length |
20" |
| Log positioning |
Loading over width |
| Chimney diameter |
6" |
| Flue outlet diameter |
6" |
| Type of chimney |
CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height (feet) |
12' |
| Baffle type |
C-Cast or equivalent |
| Approved for an alcove installation |
Yes |
| Approved for a mobile home installation |
Yes, with fresh air intake |
| Shipping Weight |
537 lb (244 kg) |
| Door type |
Single, glass with steel frame |
| Glass type |
Ceramic glass |
| Glass surface – dimensions (Width X Height) |
20 1/4" X 9 1/2" |
| Glass air-wash system |
Yes |
| Overall dimension (Height) |
36 9/16" |
| Overall dimension (Width) |
27 7/8" |
| Overall dimension (Depth) |
24 15/16" |
| Door opening – dimension (Height) |
8 3/8" |
| Door opening - dimension (Width) |
20" |
| Firebox – dimension (Height) |
11 15/16" |
| Firebox – dimension (Width) |
21 1/4" |
| Firebox – dimension (Depth) |
17 11/16" |
| Firebox lined with refractory bricks for better heat distribution |
Yes |
| Stainless-steel secondary-air system improving gas combustion |
Yes |
| Model |
Pedestal |
| Steel thickness – body |
3/16" |
| Steel thickness – top |
5/16" |
| Easy-to-access ash drawer |
Yes |
| USA standard (emissions) |
EPA Method 28 |
| Canadian Standard (emissions) |
CSA B415.1-10 |
| USA standard (safety) |
UL 1482, UL 737 |
| Canadian standard (safety) |
ULC S627 |
| Tested and listed as per applicable standards |
By an accredited laboratory (CAN/USA) |
| Warranty |
Limited lifetime |
APPLIANCE PERFORMANCE
| Fuel type : |
Dry cordwood (16" recommended) |
| Recommended heating area-ft² : |
500 - 2,100 |
| Overall firebox volume-ft³ : |
2.4 |
| EPA loading volume-ft³ : |
2.02 |
| Maximum burn time : |
8 h |
| Maximum heat output-dry cordwood : |
75,000 BTU/h (22.0 kW) |
| Overall heat output rate < : |
14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW) |
| Average overall efficiency (dry cordwood) : |
69% (HHV)
|
74 % (LHV)
|
| Optimum overall efficiency :
|
77 % |
| Optimum heat transfer efficiency : |
75 % |
| Average particulate emissions rate :
|
1.54 g/h |
| Average CO :
|
89.4 g/h |
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
|
Single wall pipe |
Double wall pipe |
| Clearance – back wall |
11" |
6" |
| Clearance - corner |
10" |
7" |
| Clearance – side wall |
16" |
16" |
| Clearance – top (measured from the platform on which the appliance is installed) |
84" |
84" |
Downloads:
