Please find any accessories you may need here
Easy to use and maintain, the Eco-55 pellet stove is ideal for heating spaces up to 2,000 ft². It features intuitive electronic control and easy to use thermostatic control. Cleaning is a breeze, with access to components that are removable without tools. Certified at only 0.96 g/h, the Eco-55 produces up to 39,260 BTU/h, and provides clean and efficient heating.
Included: 4'' Vortex pellet vent basement kit (one stove adapter, one 3"˜ to 4"˜ increaser stove adapter, two tees with cap, four pipe lengths: 12", 18", 24" and 36", one slip (adjustable section) - 9"L, two 90° elbows, one wall pass-thru, two wall supports and one jet cap), blower, ceramic glass, ash lip
- Burn time up to 51 hours (up to 120 hours with the optional hopper extension)
- Hopper capacity of 60 lb
- Top-feed burner
- EPA 2020 certified
- Proudly made in Canada
- Limited lifetime warranty
- Certified for mobile home and alcove installation
Options: wall thermostat, fresh air intake kit, hopper extension, stand alone auxiliary discharge tank, storage tank with pneumatic self-feeding pellet system, storage tank extension
Heating area 500 - 2,000 Ft2
Size 25 1/8'' W X 29 1/2'' D X 32 5/8'' H
Hopper capacity 60 lb (27 kg)
Average particulate emissions rate 0.96 g/h
Appliance performance
Fuel type Pellet (Premium grade or better) (3)
Recommended heating area-ft² () 500 - 2,000
Hopper capacity 60 lb (27 kg)
Maximum burn time () 51 h
Maximum heat input rate (4) 39,260 BTU/h (11.5 kW)
Overall heat output rate < (5) 6,648 BTU/h (1.95 kW) to 28,540 BTU/h (8.36 kW)
Average overall efficiency (6) 70.3 % (HHV) (7) 75.8 % (LHV) (8)
Optimum efficiency (9) (10) 78.4%
Optimum heat transfer efficiency (11) 73 %
Burn rate 1.2 - 4.7 lb/h
Average particulate emissions rate (1) 0.96 g/h
Average CO (12) 7.6 g/h
Average electrical power consumption for ignition cycle (13) 3.02A (360W)
Average electrical power consumption for continuous operation (13) 1.3 - 2.5A (51 - 140W)
Eco-55 pellet stove dimensions
How to replace the ignitor
How to replace F-160 thermodisc
How to replace the F-250 thermodisc
How to replace the exhaust blower
How to replace the combustion blower
How to replace the convection blower
How to replace the auger motor
How to access the fuses
How to test a component
Components location
General Features
Combustion technology Top-feed
High-efficiency certified appliance Yes, EPA 2020 approved
Electronic igniter Yes
Flue outlet diameter 3"
Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)
Baffle type Stainless steel
Approved for an alcove installation Yes
Approved for a mobile home installation Yes, with fresh air intake
Shipping Weight 277 lb (126kg)
Door type Single, glass with cast iron frame
Safe and removable handle Yes
Glass type Ceramic glass
Glass surface “ dimensions (Width X Height) 15 3/4" X 8 1/8"
Glass air-wash system Yes
Premium quality blower included (CFM) 176
Noise level at 6 feet 47 dBa (+/- 3 dBa) - 60 dBa (+/- 3 dBa)
Overall dimension (Height) 32 5/8''
Overall dimension (Width) 25 1/8''
Overall dimension (Depth) 29 1/2''
Voltage and frequency 120 VAC / 60 Hz
USA standard (emissions) ASTM E2779
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482, ASTM E1509
Canadian standard (safety) ULC S627
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
Canada United-States
Clearance “ back wall 3" 3"
Clearance - corner 3" 3"
Clearance “ side wall 6" 6"
Clearance “ top (measured from the platform on which the appliance is installed)** 48" 48"
